Showing results for 'group colors'.

With Invision Community 4.4 this plugin is mostly no longer needed! Go to the Admin Control Panel - Members - Profiles - Profile Settings Tab, scroll to the bottom of the page: Set that to global and save. That will add group formatting to user links to 99% of what this plugin did years ago... So what does this plugin do now? This plugin just looks for the edge cases that new internal setting misses and tries to patch them up. Some are doable, others not. It now covers: Profile page header and member hovercards. Messenger conversation participants block. The messenger sidebar area is more or less out of bounds for name formatting. Those names appearing there are not template-output but constructed via the underlying messenger methods and are inserted into language strings directly. It could be done but honestly its way way too messy and not worth anyone's time. Forum posts member info sections. {member='name'} Template Output Plugins These are shortcuts in templates that allow the template author to kick out a single member variable. Version 19 of this plugin now has a setting that will allow you to format these specific instances universally. You'll likely notice it firstly in the usermenu at the top of your community where your logged in name appears. If this, or any other newly-formatted name showing up somewhere is not to your liking you'll need to leave this setting off as this is applied to every {member='name} instance and cannot be filtered or targeted to exclude apps or sections of applications specifically at this time. Be sure to hit the plugin's settings in the ACP before using it!

Show a legend of your groups in the Who's Online and Recently Browsing widgets, sorted in the order you specify and linked to the search system. Handy so that people know what those group prefixes and suffixes mean. You choose which groups appear in the legend, and the order they will appear in, with the plugin settings in the ACP. Group links will carry any group formatting (colors, etc.) you may have set. Clicking the entries in the legend takes users to a list of all members with that group designation. This version is probably fine with 4.6.x but it's been awhile so try it and disable it if it doesn't work.

Adds a new widget block with the latest registered members on your board. You can display names with member avatars or just names only. Never displays validating members, only those fully registered and confirmed. Configure the display settings by editing the widget after you place it on the page: Format user links according to the group color Names-only display option Number of users to show Choose which user groups will be able to view the block.

Simple no-CPU-impact, full-page snowflakes, gently falling and swaying in the soft wind. Lots of configuration options including multiple colors. All users can toggle snowflakes on or off via option at bottom of all pages. Simple cookie set and read. If the toggle does not seem to work just refresh the page; probably a cookie set/unset/not-there quirk. Obvs if you have the 4x version just dump it. Not mine, I'm just packaging it up for INVCOM 5x. MIT licensed: https://github.com/hcodes/snowflakes

Track and display all moderators who were online over the last 24 hours! All names link to user profiles Names can be plain or group formatted Font size adjustable via selectable IPS classes (ipsType_normal, medium, small) Set a maximum number of names displayed with any overages appended as a count. Actual count appears in the widget title. Widget usable anywhere. You can choose which member groups are allowed to see this widget. You can EXCLUDE specific member groups from displaying in this widget. Names can be sorted alphabetically or by latest visit to oldest visit (see notes). Coded for zero-impact on page loads! Notes: 1) Zero-impact means zero impact. The underlying member data is generated via a task that runs every five minutes. That means a single database query for this data every five minutes, not on every user's page load. 2) This does mean that if you adjust the sort options or the groups from which moderators are selected, you will need to wait up to five minutes for these changes to appear in the widget. 3) By and large it really should not matter how many names you choose to display in the widget, but if this is creeping up towards 1000 or more, the impact will not be from the underlying widget code itself, but merely you pushing out 1000 or more names and links to the page. The widget is cached as well but you still might be pushing too much to the browser. Your site, you test! Test and adjust as needed. Outside of that single database query every five minutes, the rest is all fetched from whatever you have set for your Data Store. 4) Anonymous moderators are NEVER INCLUDED! 5) Additionally, if you are displaying names from latest visit to earliest, the timestamp used to set this is the initial session start time, not the user's latest activity. This means when a user toggles off their anon status they are likely to appear somewhat down stream in the list of names in the widget rather than right at the top. A slight hedge against stalkerish behavior. 6) Note this plugin not only allows you to display all members online from various moderator groups, but also those individual members you have granted some moderator powers to! 7) Group selection is based on primary AND secondary groups, meaning members who have a moderator group appended as a secondary group will be included!

Transform your ACP with customizable login page, custom ACP theming (light and dark)! Self-hosting server ACP dashboard widgets to track server load, memory, storage space, more! ACP dashboard widgets for tracking system errors, moderator and admin logs, members online, more! IPS patch alerts on the dashboard, PM members from their member ACP page. Tasks and wipe caches quick links. ACP Journal. Loads of improvements to the ACP experience. ACP Theme Customization Choose new fonts for pagetitles and content in the acp. (I recommend Inter for pagetitles and Roboto for text) Header, primary, and secondary menu background colors fully configurable. Header, primary, and secondary menu font colors fully configurable. Change background color of message information and message warnings. Option for tighter table row spacing throughout to give you more content in the same vertical space. Page fade-in animation effect for ACP content for an app-like feel (quite subtle though) Active (currently selected) primary menu icon set at full opacity so you can tell it is actually active. Secondary menu options have mouse-over hover effect so you can actually see what you are about to select. Selectable area increased from just the text to the entire row as well. Option to bold text secondary menu option headings. Un-sticky the ACP header to gain more screen-estate when scrolling. Remove the dashboard widget header backgrounds to lighten their heavy appearance. Change the selector toggles from rounded to squared. Change animation speeds on dialog popups - strongly recommended as these often act as speed limits as you wait for slow animations to end. Compact Menu Style which shrinks the width of the side menu and reduces the icon sizes providing more menu stuff in less space. Option to remove the visit site and support text bits and leave just the icons in the header. All menu and header icons now have a hover enlarge effect. Change the color of the default ACP Orange button! Add a separate favicon for the ACP! Jump to top of page button, lower right corner of screen. Very faded, and all CSS. General Improvements to the ACP Plugin version numbers appended directly after name. Option to display theme ID numbers after theme names (useful for designers mode to figure out which theme is which in the file directory) S3 storage handlers display endpoint and directory structure in their listed names allowing you to actually tell the difference between various S3 entities. Your most online stat is ALWAYS being tracked, not just tracked when the stats widget is on a page on the front end! PM members from the member page! Member view tweaks including moving the tabs from the center to the left. PHPInfo link on the support page now fires off in a new tab/window instead of hijacking your ACP session. Core Software Upgrade Log view. IPS tracks and logs when you update the core software but never presents that information. Now you can see it if you need to review when something may have broken with an upgrade in the past. Login Page Add a background image or just change the color. The login box is totally customizable as well including transparency and the option to add additional text. IPS icon displayed by default. Dashboard Dashboard title now replaced with current online users count or registrations today or registrations this week or custom text. Add custom text after (or before) the version number. Optional buttons alongside the dashboard widgets add button. Wipe Caches. Tasks. Admin Log. Moderators Log. Wipe Caches saves you a trip to the support page - just click and you are done! Tasks is a quick link to the tasks list where you can manually run any task you need to or spot hung tasks. Admin and Moderators log buttons are quick links to those pages. IPS News Dashboard Widget formatted to not waste so much space. Online Admins widget now with avatars! FYI this widget shows online ACP users, not admins who are online on the front end. Patch Alert Button 3rd Party Apps and Plugins that use the update push functionality still only indicate updates on the application and plugin pages in the ACP and unless an admin has business on those pages they are rarely seen. Spacious ACP lets you add buttons to the dashboard to handle this. When a 3rd Party app has an update, the button will appear on the dashboard - click it and a dialog will popup showing the the app, when it was updated, and if the app author has provided it, an update button that will take you to the download page to get it. Of course, that is just a link to the item - the user will still need permissions to download it (for example, many times this link just goes to the Invision Marketplace listing) Invision often pushes out silent patches. These are not announced publicly and are only available if you re-download your copy of the suite from the client area or if you hit the support tool - something isn't working - if a patch is available it will list it there. This doesn't seem ideal so like the 3rd Party update button I've included a button for these silent patches. If a patch is available, the button will appear on the dashboard. Clicking it opens a dialog window listing what the patch addresses and a button to apply it. Although any ACP user will see this information, users will need permissions to apply patches/updates in order for the button to work. Look a screenshot or two above for an example of the patch available button appearing and here is the pop-up: In both the above cases, if there are no updates, no buttons will appear! Standard permissions apply to the apply patch button so restricted ACP users cannot mess about. New Dashboard Widgets Spacious Widgets are flagged with a block "S" in the Add button dropdown list. The downward pointing triangles next to the widget titles can be toggle on or off in Spacious ACP settings. The 90-Day graphs that some widgets have are configurable for fill style, color, line width, etc. They will by default pull whatever color your ACP header is set to. ACP Journal The IPS Admin Notes widget has just a single, over-writable block of text and that never seemed good enough for me so I wrote this one. Stored admin notes! Records the note, who wrote it, and when they wrote it. Dashboard widget display a configurable number of them at a time (last three to seven I believe) with few display options available. The full journal is available in the Spacious ACP menu just underneath settings or view button link on the widget itself. Full journal is searchable by entry content as well. No editing or deleting - this functions as a one-way log intentionally. System Overview Real-time server load, IPS installation size, IPS database size, memory available (or free), storage space available, options for Community in the Cloud customers, database details including your database engine and character search limits. Graph colors match your chosen ACP header colors with option to override. When memory/server space becomes critical graphs go red! You configure when the memory and server space warnings kick in! Details button for more information - server location map if Google Maps, etc. is enabled. That little blip you see on the right in the diskspace rail in the screenshot above is the size of your local IPS installation (anything within your IPS directory plus your IPS database size) - you get both the actual numeric size and a graphic representation against your drive. At a glance see if your server has been rebooted! Total uptime displayed as well. The real-time stats update every two seconds and will continue for about 10 minutes of time if you just stay on the dashboard page watching. That 10 minute timeout is intentional so that if you just forget you are logged into the ACP and are on this page, the page will be able to time-out your session. IF I let this go forever and you never leave this page you would never be logged out. System Errors Lists the last five system errors so you can actually see what problems are occurring under the hood. Those last five errors are on a look-back basis meaning the five most recent system errors that have occurred between three to seven days ago (configurable). Two errors over the last five days? Those two will display. No errors within that time span will display the "All Systems Go!" look as seen above. Widget will always provide a numeric count of the last 30 days worth of errors though that number will not be totally correct if you have set system error logs to purge less than 30 days. I strongly recommend having this on your dashboard. Just because your system appears to be running smoothly does not mean 3rd Party apps and plugins, or Invision apps even, are not throwing errors. These may be pointers to server problems or bugs that need to be reported. This widget provides direct links to the actual error reports and a button to the full list of system errors. 3rd party developers do not have a built in error reporting system like IPS does right now and we can only fix what we know about. I consider this one absolutely essential and is on every dashboard I use (and some I have access to as well). Nothing better in the world than seeing this widget empty most of the time. Nothing better than logging in and spotting trouble immediately before it becomes a real problem. Can;t hide from it when it greets you on login. Gallery Overview Mostly a rework of the default Gallery widget but with better formatting. Note the default widget (and this one) only tracks the storage space of the original images, not all the copies actually made and used by the IPS system - those stats are not saved anywhere. Includes the four newest images along with the four most viewed. Widget is fine wide or side. 90 day graph is configurable on or off as unless your site sees daily Gallery uploads the graph can look pretty barren. Forum Trends Tracks graphically 90 days worth of topics started and responses made and combined. Includes live today counts. Also include a ratio-rail so you can easily see if topics are being started but no one is talking... Some basic lifetime counts plus a look at who your recent positive contributors are. Member Trends A rail that shows the counts and ratio of your community members. From right to left members active the past seven days, the last eight to ninety days, the last ninety-one days to one year back (not shown in this screen shot). All remaining registered members that have not visited your community in the last year are flagged as inactive. If you are having your members list their birthdays, you can also get a rough median age for your members. Naturally this statistic is not worth all that much as often times members input false birthdays but in large communities this number will probably give you a decent idea of your member age. Administrators Log / Moderators Log Most Active Topics Last 3 Days As stated. Based on topic responses only. Maximum of five listed. Useful for large boards where admins can likely miss where the action is at any given time. Members Operating Systems and Web Browsers After sticking it on your dashboard either wait 24 hours for the task to kick in or manually run the task (spacious_userAgents) in the tasks area of the ACP. Heads Up! Widgets with Google Charts in them can sometimes render weird when you first drag them onto the dashboard. Just refresh the page. On install AND upgrades, Spacious tasks are automatically marked as never ran (this behavior is standard for all app tasks as of 4.3). Some widgets rely on pulling saved information that is generated by these tasks. Feel free to manually run any Spacious tasks to spark the process along if you do not feel like waiting 10-15 minutes (or longer for some stats). In some server/hosting situations some data I try to read for the System Overview widget may not be accessible. Do not buy this if the Server Overview widget is the only thing you are interested in. No refunds will be approved due to some elements of that widget not working correctly on your site. Specifically, you will need allow read access to the /proc directory on Centos/Red Hat/Ubuntu systems and in some cases you may have an Apache setting called open_basedir preventing this. A simple file edit on your server will usually solve this. VestaCP users will need to edit some configuration templates to change this variable. CIC users will not have access to the System Overview dashboard widget as the AWS infrastructure IPS uses no longer matches out to things like CPU load, memory use, etc.

Dev Mode on, Dev Mode off. Dev Mode on, Dev Mode off... Configurable on/off icons, alter the colors for the "in development mode" flaring on the left of the ACP, etc. But wait! There is also constants toggling on/off while IN_DEV! The only hitch is you must FIRST add the constants you use/want/need in to the constants.php file manually. A safer, more clean, experience all-around - otherwise I would have to prep every constant available and most of them no-one ever uses. Again, this toggle power is only while you are in Dev Mode. This is a dev tool; not a live site one. This was the first ACP flip-switch for dev mode. Prior to this plugin you would need to edit constants.php every time you wanted in or out of dev. And yes, just like the old Marketplace listing said, I was way drunk when I wrote this. But that was the initial version. All of the subsequent releases I've been quite, quite sober. Probably.

Track and display all members who were online over the last 24 hours! All names link to user profiles Names can be plain or group formatted Font size adjustable via selectable IPS classes (ipsType_normal, medium, small) Set a maximum number of names displayed with any overages appended as a count. Actual count appears in the widget title. Widget usable anywhere. You can choose which member groups are allowed to see this widget. You can EXCLUDE specific member groups from displaying in this widget. Names can be sorted alphabetically or by latest visit to oldest visit (see notes). Coded for zero-impact on page loads! Notes: 1) Zero-impact means zero impact. The underlying member data is generated via a task that runs every five minutes. That means a single database query for this data every five minutes, not on every user's page load. 2) This does mean that if you adjust the sort options or the groups from which members are selected, you will need to wait up to five minutes for these changes to appear in the widget. 3) By and large it really should not matter how many names you choose to display in the widget, but if this is creeping up towards 1000 or more, the impact will not be from the underlying widget code itself, but merely you pushing out 1000 or more names and links to the page. The widget is cached as well but you still might be pushing too much to the browser. Your site, you test! Test and adjust as needed. Outside of that single database query every five minutes, the rest is all fetched from whatever you have set for your Data Store. 4) Anonymous users are NEVER INCLUDED! 5) Additionally, if you are displaying names from latest visit to earliest, the timestamp used to set this is the initial session start time, not the user's latest activity. This means when a user toggles off their anon status they are likely to appear somewhat down stream in the list of names in the widget rather than right at the top. A slight hedge against stalkerish behavior.

This plugin will display products from your Invision Community Commerce Store in a widget block using an image carousel. You can choose to display either New Products or Featured Products and set the groups allowed to view the widget block. Featured store items are set in the Commerce app and that is where this block will pull from. When you edit a product, go to the store settings tab. The toggle to feature the item on the store index page is the one you want. New store items are a setting in Commerce that allows you to set the number of days back a product is considered "new" to the store and also the maximum number of items to falg as new. Whatever products fall under those settings will appear in the widget. Most sites use the featured option as new items don't usually get added into the store on a daily, if not weekly, basis, so even if you set the lookback to 30 days for new, you run the risk of an empty widget. Requires Invision Community Commerce obviously. The carousel will not turn on unless you have more products than will fit inside the widget. It also will not magically turn on if you shrink your browser width. The carousel determines itself whether to enable or not when the page is first loaded. Outside of that, that's pretty much it.

Flags out members online status in all comments and reviews areas of any application! Out-of-the-box support for the following IPS applications and areas: Forum - Topics - Posts Calendar - Event - Comments and Reviews Downloads - Comments and Reviews Commerce - Product Reviews Gallery - Album - Comments Gallery - Image - Comments Clubs supported as the above items are merely passed on through to the club. Note: For badges, the comment/review/post three-dot dropdown menu is often gatekept by numerous permissions. The badge is inserted within this structure. Typically, if the member group of a viewer allows them to report or share these comments/reviews/posts the badge will appear for them. Otherwise not. This gatekeeping may vary from app to app. If online status is vitally important to your community use one of the other two options. For all other 3rd-party applications, as long as they are using the built-in Invision Community commenting and reviews templates this will slot in seamlessly. Note this explicitly means they are using the LITERAL templates as provided in the Core application; called directly from the Core application (as they should). If they copy those templates and include them within their own application, or roll their own versions, in either case this mod is not likely to work with those items. Open to additional indicators. Just ask in the support topic (though no promises).

Advertisements Anywhere with CSS Targeting for Placement Built-In Advertisements After Every X-Number of Forum Posts and Forum Topics Built-In Advertisements After Last Post in Forum Topics Built-In ads.txt 1.1 Management with Output {specificad='#'} Template Output Plugin to Always Place a Specific Ad Where You Want Head Block Textarea for You to Insert Your Ad Provider JavaScript Primer Scripts Works Directly with Invision Community Built-In Ads System with Enhanced Display Top of the Page Ad Placement Option New in Version 2.0.0: Template Tag Parsing in your Advertisements! With certain advertisement applications and plugins no longer working with forthcoming versions of Invision Community (and PHP 8 requirements) for various reasons, I was approached by numerous people to maybe take a run at covering what those things did in a new application. When I realized this would affect a site I am doing work for directly that left me little choice but to actually do this. This has been tested over the last few weeks (circa October 2022 for anyone reading this down the line) not only on my local development system but also one of my live sites for basic functionality as well as an independent site running a fairly large stack of advertisement loadouts including all the x-before options and Simple CSS advertisement placement. Simple CSS Advertisement Placing Place ads anywhere you like with CSS targeting. Seriously. If you can target it (correctly...), the ad will get splashed in. All ads are parsed into page content prior to output. HTML, image, and JavaScript ads all tested and working great with this method. All ads loaded are loaded exactly as all other Invision Community ads are loaded, respecting dates available, groups that can view, and so on (this applies to all ads used in Ads Everywhere btw). Ads After X-Number Placing - Topics and Posts Don't feel like CSS targeting and just want ads all up in your forum topics and posts? Just like it sounds. Radio check-dots for selection of after numbers and away you go. It's that easy. NOTE: Forcing an ad after the last topic or post on a page is one of the first updates this application will get. If I keep adding features this would never get released... No worries - it'll happen (or you can get creative with Simple CSS ad targeting in the meantime). Ads After Last Post in Topic Although you CAN use the CSS targeting option to set an ad after the last post most people seemed to want a direct option to deal with this. 2.0.0 adds that option. ads.txt 1.1 Management and Output Full control and management. Support for OWNERDOMAIN, INVENTORYPARTNER, CONTACT, SUBDOMAIN, MANAGERDOMAIN, and exchanges of course. If you have only a few entries, use the table database management features. If you are under a single advertisement management regime and they provide you with a weekly or monthly ads.txt loadout that you are to use (and these can be MASSIVELY long), save your self oodles of trouble uploading said file to your server all the time and instead use the custom block that is here for just that reason. Preview the file as it will be output right there in the ACP. When it is time for output if you are on IPS Community in the Cloud, ads.txt is output automatically for you when requested. For those of you self-hosted, the same is available though if you do not have rewrites enabled or rewrites is not set in a certain way, the automatic output will fail. No worries! Everyone (CIC included) can always download the file for backup purposes and self-hosters can use it to upload to their server themselves. Or, an exclusive feature for self-hosters, they can write the file out directly to their server from the ACP. No muss! No fuss! {specificad='#'} Template Output Plugin If you like you can load an ad based on its ID number instead of loading by location. Location loads will take all advertisements available under that location flag and choose from them based upon certain choices you make (oldest, random, least impressions, etc.). You can use this output tag to always no matter what load a specific ad in a specific location. This still respects the usual advertisements checks on group permissions to view, dates made available, etc. It is just another way of loading an advertisement. ACP Head Block Simple textarea for you to stick in you JavaScript ad providers primer code. This is usually a single code block though sometimes more than one such as loading an external script and then a script block that does the actual ad priming, that does the setup and inits for the ad network in question. This area will save you from editing your global theme templates to insert same. Just do so here instead and if you ever need to change things come back here and save yourself template editing. See the notes below. Note you can also stick anything else you need in the <head> section of your global template here - fonts, other JavaScript loads, etc... Enhanced ACP Advertisements View When viewing all advertisements in the ACP, you will now see the location or locations you have applied to each ad, the ID number of the ad itself, and on hover over the locations, the location name you would use when using the {advertisement=""} output plugins in your templates. Top of Page Placement Might not be for everyone but I know at least one person asked about this. Yes. The very top of the page. This is like all the other default advertisement locations; treat it as such. Template Tag Parsing INVCOM template tags such as {member="..."} and so on are as of version 2.0.0 parsed in your advertisement code. NOTES 1) When using advertisement providers that provide you with JavaScript code to insert in the <head> area of your global template, you MUST add the async flag to those inserts e.g. <script async whatever whatever....>STUFF</script>. This is best practice anyways. 2) When sticking in JavaScript ad blocks and toggling their use across multiple areas on the same page, if those ad blocks share a single id you will probably run into problems. This has nothing to do with Ads Everywhere; it is just basic Internet Ads 101, but I want to get ahead of support questions on this right now. In other words, I'm glad to be helpful, but be helpful to yourself and read up on how JavaScript ads work before coming to the support topic and asking why things aren't working. 3) When using the Simple CSS advertisement placement option, if your CSS target is syntactically wrong or flat out misses the target, nothing will be inserted. Try, try again! You can also ask (nicely...) in the support topic. Others, and myself, will likely be glad to help (maybe not immediately though - patience please). 4) Using Simple CSS to insert ads into the page, depending on the advertisement html code inserted and the location you stick it in, may interfere with some page formatting and JavaScript in place already. You may need to adjust your targeting, your html ad code (wrapping JS or otherwise) or pick a better location. Feel free to take this to the support topic if you encounter it. 5) This application has nothing to do with any ad network loading troubles or CORS problems you may see in your JS console when inspecting a page on your site. Those that know, know: ad networks utilizing JS and real-time bidding will pop in stuff that will just error on load for an insanely large number of reasons. 6) There are some advertisement providers that now handle everything - yes, that means everything, including placement on your site. If one of thee guys ends up being your provider, you will no longer need to use this application. They will handle the CSS-based insertion of ads in various places on your site themselves. Make sure you need to insert ads anywhere before purchasing this app!

Use this to verify you are making the proper connection to an Invision Community API endpoint. If you need to get an API connection up to speed, this is your tool. It only uses GET calls, no POSTS. And there is no OAuth testing either or anything beyond what the label says: API testing of GETs. Once you have a simple GET call sorted, the rest is on you and should be simple enough now that you have the basics out of the way You can use this to query the APIs live on your own localhost machine. You can call from localhost to a live site. You can call from livesite to livesite. This is a devtool but it it is perfectly safe, and firewalled, for use on livesites where you might need to track down some connection problems. You can have as many copies of this widget on a page as you like! Test separate individual API calls with each one! ICAPIT is also fantastic for testing your own API rollouts in your applications if you have never made those yourself before. Set up your application API code, give yourself a key and the proper permissions to it, and just call it from the plugin and see what you get! Not only that but you can look at the response modal to see how the exact call was made at the code level. Nothing fancy here; copy-paste as you need - it's all basic PHP code. Great for when you are needing to READ from the Invision Community API. Every step of the way, you should either receive the correct JSON response, or a myriad of error responses which will aid you in tracking down your problems. One tab is dedicated to all the possible error responses the Invision Community API puts out internally - no need to go looking for what they mean, they are all right here. FYI this code is an INTERNAL tool for myself so if you poke under the hood you'll see a LOT of copypasta so leave me alone and you're not my supervisor. It gets the job done quite well. User MUST be in the administrators group to view this plugin. Do not install it, drag it onto a page with someone who has widget permissions but is not an administrator and expect to see the widget/s. Same if you are not logged in as an administrator. For each instance of the widget: Edit the widget's block configuration to enter your API key. API keys displayed in the widget or results modal will only show the first four characters for safety if you are using this in a public setting and someone glances over your shoulder and so on. Click the Configure API Call button on the widget to configure the actual API call. This is where you will enter the site URL, the API call, and set various options. Click the Make Call button to make the call. A results modal will display on the screen showing you the results of the call. To make subsequent calls with that particular widget you must either change the Configure API Call settings and save or refresh the page. If you are encountering problems or spurious returns, make sure to use the direct cURL option in the widget settings (as opposed to the IPS wrappers). This will provide you with the cURL error output which can be invaluable as not all the error responses will be the clean, sanitized, canned IPS API json responses. As an example, your local dev machine will probably have a self-signed SSL certificate. There is a setting that allows you to disable SSL checks when making an API call, and you will need to have this enabled when you are using this to read APIs on your own localhost. Don't believe me? What happens if you turn that off and do make those SSL checks on your local machine with the self-signed cert? Well that "0" is not too helpful for a response. However, I made that call with direct cURL so let's look at that last tab... There you go. I can see many avenues for improvement and expansion with this tool but 5x is inbound so I'm content to let this sleeping dog lie and see what's what in a few months. If you find it useful, I'm glad you did </rattles tip-jar>. Any hitches, questions, and the like, hit the forums. By the way, I do have a companion to this, a plugin that you install on the server where you are reading the API from, that lets you dump $_SERVER output to the system log when the authorizationHeaders() function is hit, which is only hit when API and OAUTH calls are made to the server. You can set how many minutes it will log these for which gives you enough time to turn this logging on, and then hit the API with ICAPIT (or any other way you like) once or however many times you like, and catch those $_SERVER outputs for debugging. I used this to spot missing or malformed headers, bad encodings of credentials, etc. You are probably in the weeds if you need this (or the server you are doing work on is...) so just give a yell and I can add that tool to the freebie pile (after I dredge it up from the 4.5 dev installation lying dormant somewhere around here...) Lastly... This plugin does require you to have your server more or less configured correctly. If you half-assed setting up friendly urls in .htaccess or nginx confs, or have made a mess of other things, don't expect this plugin to magically tell you what is wrong.

A Massive Pile of Micro-Changes, Improvements, and Customizations for Invision Community 4.5+, Everything Including as They Say... Entirely re-written for Invision Community 4.5+ as an application. Inserts most CSS after any Invision application's CSS but before your custom css directory files. That means 3rd-party plugins and your own custom.css file will always take precedence. You can allow any topic creator to edit their first post in topics within the forums of your choice. Set both post count and topic count as stats displaying in Forum indexes. Scrunches down review stars. Collapses (with optional max-size) embedded images in posts AND displays them in-line. No more massive stacked image posts! Font Awesome 5 support! Font Awesome 6 support! Limit attachments allowed per-post Speed up animation speeds for pop-ups and other elements. Customize the default error page that displays with a background image, custom text, more! Full Messenger box warning for users. Forums Topic and Post embeds customizable! You can make them look really nice... Sticky Sidebars! (Note this is done with JavaScript but there is native browser support now so this will get updated) Zalgo text remover! A hell of a lot more... NOTE: Calendar stuff is no longer valid with the movement to the Events app and will get pulled in the next release. 2.2.0 ------------------------ NEW! Sticky Sidebars! 2.1.0 ------------------------ NEW! Zalgo text eliminator! NEW! Usermenu options to remove separators, section titles, and the achievements block. 2.0.0 (Late-June 2021 Release coinciding with the release of Invision Community 4.6) ------------------------ Updated for 4.6 Compatibility REMOVED! Lazy Load on userphoto template - IPS has included same natively with 4.6 FIX! Limiting attachments in forum posts was either slightly broke or just slightly broke on 4.6; patched. NEW! Recent Status Updates widget now with three possible views AND you can customize the number of lines output per update - no more three line limit! TWEAK! for when displaying both topic and post count stats together to add more room for larger counts NEW! Remove the icon area from Forum index displays. NEW! Append <new> badges at the end of forum titles when new content is within in index view - combine with removed icon area for a clean lean look. NEW! Above also does the same for link forums and password-protected forums. 1.3.0 ------------------------ NEW! Core - Lazy-load option for userphotos NEW! Forums - Index - Option to hide the circle-dot unread marker on sub-forums (sub-forum titles remain bolded when unread) NEW! Forums - Topics - append topic author's user group after author's name. Plain or formatted. ADD! A few new language strings to replace hard-coded text in settings. 1.2.0 ------------------------- UPDATE! Altered the breadcrumb hook. Home icon now inserted without replacing elements, home text removed via JS. UPDATE! Review stars now use the complete half-star icon instead of the default half and half-flipped approach. NEW! FA5 Pro licensed icons supported. FIX! Reverse Post Order in Topics setting when set to apply to all forums. FIX! Some sites do not ajax-load new pages of Forum topics, so I had to fix up the topic post numbering feature to account for that. UPDATE! Also improved the page numbering feature to work better with custom themes that have moved the .ipsComment_tools structure to the postContainer template instead of the post template KS 1.1.0 ------------------------- UPDATE! Added responsive phone-view to the Forums in-lined image feature, misc. adjusted CSS. UPDATE! New JavaScript catch for Forums in-lined images: ANY paragraph with images that have inline-css styles are skipped. UPDATE! Sets min-row height for forum rows when do not show statistics on mobile views is enabled. UPDATE! Re-worked the Show Only Members on Online Users page. Now just sets the menu link to default to the members filter. No CSS hiding, all filters, including guests, still available. Best possible solution. NEW BY REQUEST! Site terms and conditions option: place in footer, use full theme instead of minimal. NOTE: These terms and conditions only appear on new registrations or when users are forced to accept changed terms and conditions. This KS setting allows them to be viewed at any time. NEW BY REQUEST! Posts numbered in Forum Topics. Either the actual universal post number or numerically 1-2-3 per-topic. KS 1.0.0 ------------------------- CORE: Compact Star Ratings Do Not Display Guests on the Online Users Page Enable Font Awesome 5 Support Default Search Results Order Member has Full Messenger Warning Community Guidelines Display with Full Theme, Not Minimal Community Privacy Policy Display with Full Theme, Not Minimal Display a Link to Your Guidelines in the Footer Adjust Animation Speeds Remove the Vertical Separators between the Menu Options in Userbar Replace Create menu option with an Icon Remove Userbar Member Avatar on Desktop View Manipulate the Mark Site Read Link - icon or text only, remove, or move to usermenu Manipulate the Default Stream Link - icon or text only, remove, or move to usermenu Manipulate the Home Breadcrumb Element - restore icon, display icon and text Remove the Last Breadcrumb Element Larger Profile Cover Photo Customizable Error Page FORUMS: Remove the title 'Forums' from the Index Page Append Category Descriptions Beneath Category Titles Forum Statistics Displayed - post count, topic count, both Table View - Do Not Show Forum Statistics on Tablet and Phone Views Table View - Remove Sub-Forums Indent and Angle Mark Adjust Grid View Title Size Force the Forums > Post Feed Widget to Pull Only First Posts Allow Authors to Always Edit First Initial Posts in Topics - selectable per forum Remove Topic Location from Date Line Add a Locked Icon to Locked Topic Titles Display Posts in Topics in Order of Latest Posts to Oldest Posts in Select Forums, selectable per forum, see details for explanation/warnings Topic Activity Blocks - How Many Top Posters to Display Topic Activity Blocks - How Many Popular Days to Display Topic Activity Blocks - How Many Image Attachments to Display Display only the Time of Post Entry - removes the word 'Posted' Hide the MultiQuote Button Hide the Quote Link/Button Change the Quote Link into a Button Set a Limit on the Number of Attachments per Post - see details for limitations Float Image Attachments in Posts - collapses attached images side-by-side instead of stacking them Customizable Topic Embeds Customizable Post Embeds GALLERY: miniAlbum template tweaks BLOGS: Larger Blog Cover Photo Larger Blog Title Size Hide the Blog Header on Blog Entries Adjust Blog Entry Photo Size CALENDAR: Squared Edges on Event Listings Remove "Event Details" Title Text from Event View Larger Event Cover Photo Larger Event Title Size DOWNLOADS: Customize the Size of the Screenshots Carousel - height and width separately COMMERCE: Enlarge Product View - Primary Product Image Enlarge Product View - Thumb Images Adjust Product View - Product Title Font Size